The 2020 Mini 3D Hatch JOHN COOPER WORKS is a front-wheel drive three-door hatchback that was released to the Australian market on 01/03/2020 classified as a F56. The 3D Hatch is regarded as a small car built in United Kingdom with prices from a dealer as a used car starting at A$46,500.
The 3D Hatch is a front-wheel drive 3 door with 4 seats, powered by a 2.0L TURBO 4 engine that has 170 kW of power (at 5200 rpm) and 320 Nm of torque (at 1450 rpm) via a Six-speed Manual. MINI claims the 3D Hatch JOHN COOPER WORKS uses 6.9L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 157g of CO2. It has a 44L fuel tank, meaning it should be able to travel 638km per full tank.
The 3D Hatch measures 1414mm (55.7 inches) in height, 3874mm (152.5 inches) in length, 1727mm (68.0 inches) in width with a 2495mm (98.2 inches) wheelbase that brings about a total of 1295kg (2855.0 lbs) of unladen weight. The 3D Hatch JOHN COOPER WORKS comes standard with 205/40 R18 front tyres and 205/40 R18 rear tyres. It requires a service every 12 months or 25,000 km, whichever comes first.
The 2020 Mini 3D Hatch JOHN COOPER WORKS has a 143mm ground clearance. It has a final gear ratio of 3.824.
The 3D Hatch has received a 4 star rating from ANCAP. The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to WMWXR920%0TE35862.
Mini 3D Hatch JOHN COOPER WORKS Details | |
---|---|
Price | - |
Used Price From Dealer | A$46,500 |
Trade-In Value | A$40,000 |
Series | F56 |
Body Style | three-door hatchback |
Release date | 01/03/2020 |
Discontinued date | 30/06/2020 |
Drive type | FWD |
VIN plate location | Driver Side Inner Guard |
Compliance plate location | Pass Side Lower B-Pillar |
VIN Example | WMWXR920%0TE35862 |
Country of origin | United Kingdom |
Segment | Small Car |
Safety ANCAP rating | 4 stars |
Number of doors | 3 |
Seating capacity | 4 |
Mini 3D Hatch JOHN COOPER WORKS Engine Specifications | |
Type | TURBO MPFI |
Size | 1998cc, 2.0L |
Power @ RPM | 170kW @ 5200rpm (228.0 hp) |
Torque @ RPM | 320Nm @ 1450rpm (236.0 lb-ft) |
Cylinders | turbocharged four-cylinder |
Number of Valves | 16 |
Valves | VARIABLE DOUBLE OVERHEAD CAM |
Euro Rating | EURO 6 |
Compression ratio | 10 |
Power/weight ratio | 131.3kw/tonne |
Bore/stroke | 84mm × 90.1mm (3.3in × 3.5in) |
Mini 3D Hatch JOHN COOPER WORKS Drivetrain and Wheels | |
Transmission | Six-speed Manual |
Drive type | front-wheel drive |
Steering type | RACK & PINION - POWER ASSISTED |
Turning circle | 10.8m (35.4 ft) |
Brake (front) type | DISC - VENTILATED |
Brake (rear) type | DISC |
Front tyre & wheel size | 205/40 R18 - 7Jx18 |
Rear tyre & wheel size | 205/40 R18 - 7Jx18 |
Front suspension type | MacPherson strut, Coil Spring, Gas damper, Anti roll bar |
Rear suspension type | Multi-link system, Coil Spring, Gas damper, Anti roll bar |
Mini 3D Hatch JOHN COOPER WORKS Fuel Specifications | |
Fuel type | PREMIUM UNLEADED PETROL |
Fuel tank capacity | 44L |
Fuel consumption (combined average) | 6.9L / 100km |
Fuel consumption city (average) | 8.6L / 100km |
Fuel consumption highway (average) | 5.9L / 100km |
Vehicle range | 637.7km (396.2 miles) |
Emission standard | EURO 6 |
E10 compatible | - |
CO2 emissions (combined) | 157g / 100km |
CO2 emissions (city) | 197g / 100km |
CO2 emissions (highway) | 134g / 100km |
Mini 3D Hatch JOHN COOPER WORKS Dimensions | |
Length | 3874mm (152.5 inches) |
Width | 1727mm (68.0 inches) |
Height | 1414mm (55.7 inches) |
Wheelbase | 2495mm (98.2 inches) |
Front track | 1485mm (58.5 inches) |
Rear track | 1485mm (58.5 inches) |
Ground clearance | 143mm (5.6 inches) |
Unladen weight | 1295kg (2855.0 lbs) |
Gross Vehicle Mass | 1685kg (3714.8 lbs) |
Gross Combination Mass | - |
Mini 3D Hatch JOHN COOPER WORKS Towing Capacity | |
Braked towing capacity | - |
Unbraked towing capacity | - |
Mini 3D Hatch JOHN COOPER WORKS Warranty | |
Warranty length | 36 months |
Warranty distance | Unlimited km |
Mini 3D Hatch JOHN COOPER WORKS Servicing | |
Service interval (km) | 25,000 km |
Service interval (months) | 12 months |
Mini 3D Hatch JOHN COOPER WORKS Options | |
Standard Features |
|
Optional Features |
|